Photo Thread: How about some pics of M9s attached to weapons

[Quarterbore]

I will dig out my carbine tonight if I get a chance an post some pics of my M9 mounted... Can we see some of yours mounted too?



Above is a rather old pic of mine (2001?) ... this is a Bushmaster Registered Receiver (M-16 Full Auto) and it showns an M-7 bayonet, Soligen Eickhorn M-16 bayonet, and a Buck M9 Bayonet... The mag at upper left is a 30-rd mag while the mag to the right is a 100-rd Beta mag...


The second pic is an even older pic (1999?) that shows a pair of Bushmaster AR-15s I used to own. Top is a 20-inch HBAR while the bottom is an M4A4 with the 14.5-inch barrel. Note these both have phantom flash hiders... Both are Buck M9s.

[Quarterbore]

Attached is a Photo of the Ontario OKC3S USMC bayonet mounted on a 20-inch rifle upper and note the 16-inch Carbine with a M7 bayonet with the handle extension!

Photo Provided by Alpha-Romeo3 of ARFCOM

Yes, you may use my picture.

I just want to request that a footnote of my screen name and AR15.com is mentioned in the webpage.

I bought that Ontario OKC3S USMC bayonet from my local gun shop back in Feb. 2005.

My extended M7 bayonet is a Gen Cut marked General Cutlery I bought from DSG Arms (TX) in 2005 but they no longer have it in stock, sometimes I see guys selling them at the EE and e-bay.

For reference my M7 in the picture is mounted on my LMT 16" M4 style Defender 2000 carbine.

Thanks for your site it's very useful in getting more info for the AR15 and M9 bayonets.


Regards,

Alpha-Romeo3 (Rudy)

[Quarterbore]

Here are two more photos shoing the OKC3S mounted on AR-15s.

Note this is a full auto M4A3 with a 14.5-inch barrel and the bayonet ring is where it is supposed to be:


Thanks to hk33k2 of ARFCOM for use of his image above

Note in the following photo this is a 16-inch barrel and the mounting ring is around the barrel instead of the base of the flash hider! Also note the barrel is a smaller diameter then the flash hider so there is a fair amount of slip when mounting a bayonet like this!


Thanks to Ahiodsohi from ARFCOM for use of their image

[Quarterbore]

Reposted from this thread: http://www.quarterbore.net/forums/showthread.php?t=355


Colt 14.5-inch M4 Barrel with LanCay M9 Bayonet


Rock River Arms 16-inch Midlength Barrel with LanCay M9 Bayonet

Note in the top photo how the Bayonet mounting ring fits over the flash hider where the flash hider that is threaded to the barrel. In the second photo the mounting ring is actually forward of the barrel.

Personally, I find this to be a foolish mistake of Armalite back when they came up with the specifications for the mid-length upper. Then, RRA was foolish enough to use Armalite's flawed lead!

[m9er]

[Quarterbore]

Here is another photo that shows a M7 Bayonet mounted on a 16-inch lightweight barrel.


Special thanks to Bumblebee_Bob of AR15.com for providing this image!